The SmallRig Cold Shoe Mount review centers on a compact two-piece kit for adding accessory attachment points to camera cages, handles, plates, and other compatible supports.
Its straightforward threaded installation suits builders who want to position a microphone, flash, or LED light without adding an adjustable arm.
SmallRig Cold Shoe Review Summary
The quick verdict

3,000+ ratings
Read Amazon ReviewsSmallRig Cold Shoe Mount 2060
A practical two-piece mounting option for cage-based camera setups that need fixed cold shoe points for a microphone, flash, or LED light.
- Two aluminum alloy cold shoe mounts, each measuring 25 by 25 mm.
- Includes two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners.
- Compatible with camera accessories that have 1/4-inch or M2.5 threaded holes, including cages, handles, plates, and cold shoe blocks.
- Designed to hold a microphone, flash, or LED light on compatible camera rig accessories.
Pros
- A two-piece kit can add shoe attachment points in separate places on a rig.
- Includes both 1/4-inch-20 and M2.5 screws for different threaded mounting needs.
Consider before buying
- It provides fixed placement; buyers who need to angle or reposition an accessory may prefer an adjustable mount.
- Compatibility depends on the threaded holes and cage arrangement, so buyers should confirm the exact mounting point and screw choice.
Read the full review summary
The 2060 kit pairs two aluminum alloy cold shoe mounts with both 1/4-inch-20 and M2.5 mounting hardware, so it can accommodate different threaded setups.
Each mount measures 25 by 25 mm, and the included arrows indicate mounting direction; bevels at one end are designed to help prevent an attached accessory from sliding off accidentally.
It is most appealing for photographers and video creators assembling a cage or rig with fixed accessory positions.
The two mounts offer some flexibility across a setup, while the main tradeoff is that placement depends on the available threaded holes and the included screws.
Buyers should check the cage model and attachment point before ordering, especially if they use the SmallRig Full Cage 1661 or a DJI or Zhiyun gimbal.
The buying factors
SmallRig Cold Shoe Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting versatility
The 1/4-inch-20 thread and included M2.5 screws support multiple threaded attachment arrangements.
Accessory compatibility
The mount is intended for common cold shoe accessories such as microphones, flashes, and LED lights.
Kit value
Two mounts and a set of mounting hardware provide options for more than one attachment point.
Rig integration
Its compact 25 by 25 mm footprint is suited to adding a shoe point to a cage, handle, or plate.
Installation guidance
Surface arrows indicate orientation, and the two screw types address different attachment arrangements.
Positioning flexibility
This is a fixed mount rather than an articulated arm, so the attachment angle depends on where it is installed.
Key Features and Specifications of SmallRig Cold Shoe
- Two aluminum alloy cold shoe mounts, each measuring 25 by 25 mm.
- Includes two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners.
- Compatible with camera accessories that have 1/4-inch or M2.5 threaded holes, including cages, handles, plates, and cold shoe blocks.
- Designed to hold a microphone, flash, or LED light on compatible camera rig accessories.
- Two surface arrows show the suggested mounting direction.
- Beveled retaining edges at one end are designed to help prevent accidental removal of a shoe-mounted accessory.
- For most cages, the mount attaches with the supplied 1/4-inch-20 screw; M2.5 fastening is not needed in that arrangement, with a stated exception for SmallRig Full Cage 1661.
Pros and Cons of SmallRig Cold Shoe
Pros
- A two-piece kit can add shoe attachment points in separate places on a rig.
- Includes both 1/4-inch-20 and M2.5 screws for different threaded mounting needs.
- Compact square footprint can fit into cage and plate layouts where space is limited.
- Directional arrows and beveled edges make the installation and accessory retention intent easy to understand.
Consider before buying
- It provides fixed placement; buyers who need to angle or reposition an accessory may prefer an adjustable mount.
- Compatibility depends on the threaded holes and cage arrangement, so buyers should confirm the exact mounting point and screw choice.
- The product description excludes DJI and Zhiyun gimbals and identifies the SmallRig Full Cage 1661 as an exception to the usual cage mounting approach.
Who Should Buy SmallRig Cold Shoe?
Good fit
Consider the 2060 if you are building a camera cage or handle setup and want simple cold shoe positions for a microphone, flash, or LED light.
The two mounts let you plan more than one point of attachment, while the screw assortment helps when the rig offers different threaded holes.
It is a particularly sensible fit when you know where the accessory should sit and do not need an adjustable arm.
Before buying, check the cage or plate layout, confirm the available thread, and account for the Full Cage 1661 exception if that is your setup.
For creators who like to assemble their rigs from compatible parts, the small footprint and included spanners make this a focused mounting kit rather than a larger support system.
Treat it as a way to add a shoe point to a threaded support, not as a universal mount for every camera or stabilizer.
Who should skip it
Skip this design if your primary need is an adjustable viewing or lighting angle; the mount is a fixed shoe attachment rather than a ball head.
Choose another mounting approach if you need a fit for a DJI or Zhiyun gimbal. For any other camera support, verify its thread and clearance before committing to a mounting position.
How the SmallRig Cold Shoe Mount Fits a Camera Rig
Threaded installation and cage fit
The 2060 attaches to supports through 1/4-inch-20 or M2.5 threaded holes, with the included screws providing the fastening options.
That makes the mounting surface the key compatibility check: identify its thread and determine which screw arrangement suits the cage or plate.
Most cage installations use the 1/4-inch-20 screw alone, while the Full Cage 1661 is called out as an exception.
Planning accessory placement
Because each mount creates a fixed cold shoe point, placement determines the accessory's position.
This is useful when a creator has a planned layout for a microphone, flash, or LED light, but it offers less repositioning flexibility than a ball head or articulated arm.
Think through where cables, controls, and other rig components need to sit before choosing a threaded hole.
Retention and the two-piece kit
The arrows provide a simple orientation cue during installation, and the bevels at one end are intended to help keep a shoe-mounted accessory from sliding off unintentionally.
Two mounts can support separate accessory locations or leave one available for another compatible setup.
The description does not give a load rating, so buyers with heavier accessories should check the accessory and support maker's mounting guidance rather than assume a capacity.
Checking the intended system
The product is aimed at cage, handle, plate, and similar threaded camera rig accessories.
The stated gimbal exclusions mean it is not the right choice for DJI or Zhiyun gimbal use, and the named Full Cage 1661 exception deserves special attention.
For other setups, compare the mount's 25 mm square footprint with the available space and confirm screw access before assembling the rig.
Alternatives to SmallRig Cold Shoe
Camera Flash Shoe Mounts alternative

1,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Adapter with Shoe Mount 1135
Choose the 2060 for multiple fixed shoe points on compatible threaded supports. The 1135 is the better fit when you need to adjust an accessory angle and can work within its stated weight guidance.
- The 1135 uses a double ball head with a side locking knob and can rotate through 180 degrees for angle adjustment; its description does not recommend it for monitors or LED lights over 1.0 kg.
- The 2060 is a fixed cold shoe mount that attaches to a compatible threaded point, with two mounts supplied in the kit.
Camera Flash Shoe Mounts alternative

700+ ratings
Read Amazon ReviewsSmallRig Mini Ball Head Cold Shoe Mount Adapter 3577
The 2060 suits buyers prioritizing two fixed mounting points and threaded cage installation. Consider the 3577 for a compact single mount when tilt adjustment matters and the attached device stays within its stated support limit.
- The 3577 is a single mini ball head mount with a 1/4-inch screw on top, a cold shoe adapter at the base, up to 138 degrees of tilt, and a stated maximum supported device weight of 250 g.
- The 2060 provides two fixed cold shoe mounts and includes screws for 1/4-inch-20 and M2.5 threaded holes.
Is SmallRig Cold Shoe Worth It?
The SmallRig Cold Shoe Mount 2060 is worth considering for a cage-based camera rig that needs compact, fixed shoe points for microphones, flashes, or LED lights.
Its two mounts, mixed screw hardware, and clear orientation cues make it a practical option for a planned threaded installation.
Check your cage model, thread type, and available clearance first, and avoid it for DJI or Zhiyun gimbal use.
If you need angle adjustment, choose a ball head style mount instead; if fixed placement is what your rig needs, the 2060 offers a focused solution.
Your review at a glance

3,000+ ratings
Read Amazon ReviewsSmallRig Cold Shoe Mount 2060
A practical two-piece mounting option for cage-based camera setups that need fixed cold shoe points for a microphone, flash, or LED light.
- Two aluminum alloy cold shoe mounts, each measuring 25 by 25 mm.
- Includes two 1/4-inch-20 screws, four M2.5 screws, and two hex spanners.
- Compatible with camera accessories that have 1/4-inch or M2.5 threaded holes, including cages, handles, plates, and cold shoe blocks.
- Designed to hold a microphone, flash, or LED light on compatible camera rig accessories.